User Manual
H
OW
T
O
… February
16,
2010
Xynergi Media Production Centre
Page 28
Now we'll access a wider selection.
Using SEL
Press
SEL
to display up to 48 paths. The rules for selection are the same as with the 12-track
displays.
Use the
Tracks
,
Lives
and
Buses
buttons to choose the type of signal path you would like to
select. If tracks are selected, use the
Bank
Up
and
Bank
Down
buttons to show another 48.
Press
exit
to leave.
This way of using SEL is called
Latched
.
There is another way to use SEL, called
Momentary
. In this mode, you press and hold
SEL
, and
use its buttons while holding it down. Then you release , and it exits automatically
.
Using Track
Hold down
Track
. While it’s held down you can do the following:
Turn the
Jog Wheel
to move the whole track selection up and down.
Press the
+
or
–
button in the Numpad to move the track selection one place up or down.
Type a number (up to 3 digits) on the Numpad, then release
Track
to select that track.
This is great for selecting tracks that are not currently visible on the picture keys or the
Edit Screen.
Using All Tracks
The
All Tracks
button will cause selection of every track in the project. If you press it a second
time i.e. when all tracks are already selected, it will return to the previous track selection.
MULTI
Overview
MULTI
allows you to change mixing parameters on many paths at the same time.
When Multi is
Off
, the Pad controls only the
most-recently-selected
path.
Pressing
MULTI
changes its display to
MULTI REL
(relative). All changes made with the Pad now
apply to all selected signal paths.
Changes made with rotary knobs are applied relatively i.e. values amongst the signal paths
remain different, but rise and fall together. But values “compress” when the reach upper or lower
limits. This is demonstrated in the sequence that follows.
