User Manual
A
UTOMATION
February
16,
2010
Xynergi Media Production Centre
Page 159
Automation Curves
Automation data for tracks can be shown on the Edit Screen using the following command sequence:
View
Smart Pane
Automation, or by pressing the
{Curves}
soft key in the Mix Menu.
To display automation curves on one or more tracks:
Step 1
Select the tracks where the automation is to be displayed
Step 2
Click the
Display
button
Step 3
Select the parameter to be displayed – use either the pull down menu or a preset
Note that each track may show its own selected parameter. The Display button is also used to turn the
curves off.
Presets
Presets are used to quickly access a particular parameter. The first six buttons are provided with factory
presets, but you can replace them with your own.
To apply a preset, simply click on it when the Display button is selected.
To create a preset:
Step 1
Turn the
Display
button on if necessary
Step 2
Select a parameter to be displayed using either the pull down menu
Step 3
Click the Save button
Step 4
Click a preset button
Step 5
The system will request a name for the preset. You may use the suggested name or choose
your own.
Click to toggle
automation
graphs on or off
Click to remove
automation
display
parameter
Pull down menu
of automation
display
parameter
Preset controls
Edit Controls
