43
agility
TM
Series Soft Start User Manual
MAN-AGY-001. Version 04. 21/09/2018
PNU Name
Description
Options
Words Type Units Detail
1
Cntrl
Mode
Selects the method for starting and
controlling the motor
Local : Control using the button on the
keypad
Remote : Control using the terminals.
Modbus : Control via Modbus network
0=Local,
1=Remote,
2=Modbus.
1
R/W
Multiplier: 1
Divisor:1
Offset: 0
Min: 0
Max: 2
Default: 0
2
Initial
Volts
Percentage of the supply voltage applied
to motor at the beginning of the soft
start.
Increase to provide more torque If the
load fails to break away.
Decrease if the motor accelerates too
quickly.
1
R/W %
Multiplier:
100
Divisor:1638
4
Offset: 0
Min: 1638
Max: 13107
Default:
3277
4
Start Time Time taken to soft start from the "Initial
Volts" to the end of the start
Normally set between 5 and 30 seconds.
Actual time to get to full voltage
depends on the "Limit Amps".
If set too long the motor can be at speed
before the end of the time set.
1
R/W s
Multiplier: 1
Divisor:1
Offset: 0
Min: 1
Max: 30
Default: 10
5
Stop Time
The time taken to soft stop from full
voltage to the end of the stop
Normally set between 15 and 30
seconds.
Actual time to get to the final voltage
depends on the "Limit Amps".
If set too long the motor may reach zero
speed before the end of the time set.
1
R/W s
Multiplier: 1
Divisor:1
Offset: 0
Min: 0
Max: 30
Default: 0
Modbus RTU Parameters