![background image](http://html1.mh-extra.com/html/faicom/a/a_use-and-maintenance-manual_3189904011.webp)
8 - INSTALLATION
9 - LINK
- 11 -
Optional
A
B
Check the packaging at the reception of the goods and store only at a dry place. Verify that
the device hasn't been damaged during transport or storage operations. Make sure you re-
ceive all the components. Ask the manufacturer for any possible missing component.
The hose reel has to be wall mounted at a minimum height of the floor of 2.50 m in or
-
der to prevent accidents during work operations.
Considering the hose reel weight and
dimensions, his movement requires the use of lifter devices. In particular cases it is possible
to mount it on the floor or on other machines as accessory, only if complete with a fixed sup
-
port. Choose the most suitable position for the outlet of the hose between the 2 alternatives
suggested (see pictures A - B). Mount the hose reel already complete with hose on stiff and
consistent walls, using 4 dowels of 10 mm diameter. The assembly with the revolving stand
(optional) shall be carried out using two dowels of 10 mm diameter.
WARNING! The manufacturer declines any responsibility for injuries to people or da-
mages to things caused by a wrong assembly of the hose reel.
IMPORTANT! Any installation operation shall be carried out by a suitably
trained staff, following carefully the information given in this manual.
Always connect the hose reel to the line by the couplers
and the flexible hose (A) suitable for this use, above all
in case of high pressure and temperature.
IMPORTANT! When you lock the coupler, keep back the swi-
vel joint by the 27 wrench (B) in order not to damage it. Thus
it is possible to avoid consequent losses of fluid from the
inside seal (hose reel for high pressure).
According to the rules, put a ball-tap on the feeding line of
the hose reels in order to make the maintenance operations
easier. The said ball-tap can be used as a safety valve for
dangerous situations.
GB