EN
2/INSTALLING YOUR APPLIANCE
6
Warning:
Check that your appliance has not
been damaged during transport (damage to
door or seal, etc.). If you notice any damage,
contact your retailer before using the appli-
ance.
In order to easily locate the reference infor-
mation for your appliance, we recommend
that you note these data on the "After-Sales
Service" page.
Check that:
- the electrical installation has sufficient vol-
tage.
- the supply cables are in good condition
- the diameter of the wires complies with the
installation requirements.
- your equipment has a protection of at least
16 amps.
If in doubt, contact your electrician.
The electrical connections should be made
before the appliance is installed in its housing.
Electrical safety must be ensured through
proper installation in the housing. During
installation and maintenance operations, the
appliance must be unplugged from the elec-
trical grid; fuses must be cut off or removed.
The appliance must be connected using a
(standardised) feeder cable with 3 conduc-
tors of 1.5 mm² (1 live + 1N + ground) which
must be connected to the 220-240 V ~
monophase network using a CEI 60083-stan-
dardised 1 live + 1N + ground electrical outlet
or one which complies with installation
requirements. The protection cable (green-
yellow) is connected to the appliance's
terminal and must be connected to the
appliance's ground.
If the connection is made with a plug, it must
remain accessible after the appliance has
been installed.
The oven's neutral (blue cable) must be con-
nected to the network's neutral.
Ensure your electrical installation has a sys-
tem accessible to the user which can cut off
the appliance from the power grid, with a con-
tact opening of at least 3mm for all the termi-
nals.
If the supply cable is damaged, it must be
replaced by the manufacturer, its after-sales
service or any other similarly qualified person
to avoid any danger.
Warning:
We cannot be held responsible for any
accident resulting from an inexistent, defec-
tive or incorrect ground lead.
If the oven presents any irregularity, unplug
the appliance or remove the relevant fuse at
the oven's connection lead-in.
•
BEFORE CONNECTING
•
ELECTRICAL CONNECTION
