Fagor IO-RFW-0051/6, Instruction Manual

Page: 44 / 60

44
The appliance is working, but not very well, check
• The appliance is not overloaded.
• The thermostat is set to an appropriate temperature.
• The door is closing properly.
• The door gasket is sealing properly
• There is enough ventilation at the side and rear walls.
• The ambient temperature is between 16°C to 32°C.
The appliance is noisy, check
• The appliance is level and stable.
• The cooling gas will make some noise, even when the compressor is not run-
ning.
• During operation, it is normal for the fan to run, even when the compressor is not
running.
The light does not work, check
• There is power to the appliance.
• The house fuses or circuit breakers are intact and the fuse in the plug has not
blown.
• The light button is not set to off.
Please note:
The LED lighting cannot be replaced without a service call
The door will not close properly, check
• The appliance is level and stable.
• If the door has been removed, it may not have been correctly refitted.
• The door seal is dirty.
• The shelves are not positioned correctly.
The display shows “E1” or “E2”
• The temperature sensor has failed. Please contact Call Center
EPREL
For more information about the product, please refer to the EU EPREL Product Da-
tabase at https://eprel.ec.europa.eu. For more information, please use your mobile
device to scan the QR code on the energy label or enter the product model listed on
the energy label in the EPREL search engine https://eprel.ec.europa.eu/