3-phase servomotors. FKM
3-
PHASE SERVOM
O
TORS. FKM
Co
nne
ctio
ns
3.
Ref.2105
· 127 ·
FXM|FKM
SERVOMOTOR
Servomotor feedback device connection
In the FKM8/8V/9 series, the feedback device is a 1 Vpp of 1024 ppt
sinusoidal encoder (refs. A3/E3).
The servomotor feedback device is connected to the drive through the
base ·2· connector of the servomotor. See figure
.
The pinout information of this feedback connector ·2·, depending on the
feedback device integrated into the servomotor, is provided in chapter
of this manual.
To take the feedback signals from the servomotor feedback device to the
drive, use one of the following cables with connectors supplied by
FAGOR.
F- 3/28
Motor feedback base connector. FKM8/8V/9 series.
54
(2.12)
0.7
MAX
Ø8.5 (0.33)
c.a.3
(0.11)
SW23
SW22
54 (2.12)
0.7
MAX
Ø8.5 (0.33)
50 (1.96)
26
(1.02)
c.a. 3 (0.11)
SW23 SW22
SW: KEY WIDTH
(2)
FKM8/FKM9
FKM8/V
(2)
INFORMATION.
On FKM8/V models, the feedback base connector ·2· is hidden under the
lid. Remove the top lid of the servomotor to get to it.
i
