Fagor CO-500, Service Manual, Page: 53 / 124

22/07/2019
52
SERVICE MANUAL
EVO FRONT LOADING DISHWASHER
Informative messages (generic) about programme selection. Each model has its own.
After 5 seconds (and if the cycle has not been run in the 5-second interval), the display returns to its normal
operating state, that is, it displays the wash temperature and the programme running/selected. Once the hood has
been closed, the selected programme is started and the following messages are displayed.
SELECTED
PROGRAMME
LED ON MESSAGE DISPLAYED
P1 L3
L A V A D O 6 0 ºC P 1
P2 L3
L A V A D O 6 2 ºC P 2
P3 L3
L A V A D O 5 9 ºC P 3
PGLASS L3
L A V A D O 6 0 ºC P G
Messages while a programme is running
While a cycle is running, the display shows the wash temperature together with the programme which is running, a
progress bar and the estimated time remaining to complete the cycle.
When the programme moves to rinse, the display shows the boiler temperature, with the rest of the information,
and the L3 led flashes.
If the rinse is run at the correct temperature, the EFFI RINSE led lights up.
Both the wash temperature and the rinse temperature are only displayed for 3 seconds at the start of each cycle,
the temperature is then hidden. If the user wishes, they can display the corresponding temperature by pressing the
button SELEC .
SELECTED
PROGRAMME
LED ON MESSAGE DISPLAYED
P1 L3
A C L A R A D O 8 5 ºC P 1
P2 L3
A C L A R A D O 8 2 ºC P 2
P3 L3
A C L A R A D O 8 7 ºC P 3
PGLASS L3
A C L A R A D O 9 0 ºC P G
Messages while a programme is running
On completion of the cycle, the display flashes the message “END WASH” , until the door is opened or the appliance
is switched off. L2 lights up to indicate that the programme has ended.
9.6.13. FUNCTIONAL DESCRIPTION OF THE WASH
difference between the 4 wash programmes is the length of the cycle. P1 is the short wash programme; P2 is the
medium length wash; P3 is the long wash programme and PGLASS is the intensive wash programme for cleaning
glasses.
The phases of the wash programme are as follows:
•
Wash: the wash pump/s CMBL are activated during the programmed wash time (depends on the model
and programme).
•
Drain: The drainage pump BD is activated for a minimum of 5 seconds and continues draining until the
level PT2 is reached.
•
Rinse: new water at the programmed rinse temperature is added.