Fagor CO-500, Service Manual

Page: 88 / 124

22/07/2019 87
SERVICE MANUAL
EVO FRONT LOADING DISHWASHER
P1: with Jumper (door safety switch not active, not all outputs are disconnected if door is open)
P2: with Jumper , Soft Start active
P3: Out of use
5 RELAY CARD 12008750
DIP1

Door
DIP1=0  Glass washer / Front Loading l
To begin a new wash cycle, select the required programme, the appliance is
on stand-by meanwhile
DIP1=1  Hood type
To start a new wash cycle, just open and close the door, and the last used
programme is run
DIP2

Regeneration
DIP2=0

Standard Appliance without descaler
DIP2=1

SOFT Models
The appliance has descaler/regeneration
DIP3 
Cycle Times
Together with DIP 1 Defines the cycle times
See next page
DIP4

Rinse
Pump
DIP4=0

CO Model
No rinse pump
DIP4=1  COP Model
Has rinse pump
CYCLE TIMES WASH: P1 P2 P3 P4
FRONT
OPENING
DIP1=1 DIP3=0 90 120 180 600
DIP1=1 DIP3=1 55 75 120 600
Jumper disconnected
Jumper
Jumper disconnected Jumper disconnected
Jumper connected
Jumper connected