Fagor 8070 BL, Programming Manual

Page: 397 / 444

Programming manual.
CNC 8070
STATEMENTS AN
D INSTRUCTIONS
22.
Pro
g
ramming statements
·397·
(R
EF
: 1709)
Offset setting
The offsets that may be applied to the axes are identified with the following commands. To
apply several offsets, program the relevant commands separated by a blank space.
Screen display
At first, the axes appear ordered as they have been defined in the general machine parameter
table (by channels) and then as the swapping is defined.
#FREE AX
Frees an axis from the configuration
Removes the programmed axes from the current configuration. After removing an axis, the
position is free, but the order of the axes that remain in the channel does not change.
The programming format is as follows:
#FREE AX [<Xn>,...]
Parameter Meaning
<Xn> Axes to be added to the configuration. If the axis already
exists, it is placed in the new position.
<pos> Optional. Position of the axis in the new configuration. If not
programmed, the axis is placed after the last one. If the
position is occupied, the relevant error message will be
issued.
<offset> Optional. It sets which offset is applied to the axes. Several
offsets may be applied.
#CALL AX [X,A]
(It adds the X and A axes to the configuration, after the last existing axis)
#CALL AX [V,4,C]
(It adds the V axis to position 4 and the C axis after the last one)
Command Meaning
ALL Include all the offsets.
LOCOF Include the offset of the reference search.
FIXOF Include the fixture offset.
ORGOF Include zero offset.
MEASOF Include measurement offset.
MANOF Include the offset of the manual operations.
#CALL AX [X] ALL
#CALL AX [V1,4,Y] ORGOF FIXOF
Axis configuration
#SET AX [Y, 0, 0, Z]
Y: Abscissa axis.
Z: First auxiliary axis.
#CALL AX [X,2, W, 3]
Y: Abscissa axis.
X: Ordinate axis.
W: Axis perpendicular to the plane.
Z: First auxiliary axis.
Parameter Meaning
<Xn> Axis to be removed from the configuration
Y
X
W
Z
? 00000.0000
00000.0000
00000.0000
00000.0000
00000.0000