manualshive.com logo in svg

Fagor 8070 BL, Programming Manual

Share
Download
Fagor 8070 BL Programming Manual Download Page 271

Programming manual.  

CNC 8070

SUBROUTINES.

14.

Subro

u

tine execu

ti

on.

·271·

(R

EF

: 1709)

 

14.3.3

#CALL. Call to a global or local subroutine.

The #CALL instruction calls a local or global subroutine. This type of call allows initializing
local parameters of the subroutine. When it is a global subroutine, its whole path may be
defined.

When there are two subroutines, one local and the other one global, with the same name,
the following criteria is applied. If the path has been defined in the call, the CNC will execute
the global subroutine, otherwise, it will execute the local one.

Programming format.

The programming format is:

#CALL <path> sub 

Path definition.

Defining the path is optional. If defined, the CNC only looks for the subroutine in that folder;
if not defined, the CNC looks for the subroutine in the default folders. See 

"Location (path)

of the global subroutines." 

 on page 269.

path

Optional. Subroutine location.

sub

Name of the subroutine

#CALL C:\Cnc8070\Users\Prg\sub1.nc
#CALL C:\Cnc8070\Users\sub2.nc
#CALL Sub3.nc

Summary of Contents for 8070 BL





























































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands