Fagor 8070 BL, Programming Manual

Page: 386 / 444

Programming manual.
CNC 8070
22.
STATEMENTS AN
D INSTRUCTIONS
Pro
g
ramming statements
·386·
(R
EF
: 1709)
Programming format (2). Defining a cylindrical part.
The programming format is the following; the list of arguments appears between curly
brackets and the optional ones between angle brackets. The CYL command may be left out
at the lathe model.
#DGWZ <CYL> {LongAxis} [{LongAxisMin},{LongAxisMax},{Int},{Ext}] <P{1-4}>
<C{1-4}>..<C{1-4}>
Part number and channel number.
The graphics may represent up to 4 parts at the same time and each one of them may be
associated with one or several channels. The part zeros are always associated with the
execution channel.
<CYL>
Optional at the lathe model. Cylindrical part.
{LongAxis}
Longitudinal axis of the cylinder.
{LongAxisMin}
{LongAxisMax}
Minimum and maximum limit on the longitudinal axis.
{Int}{Ext}
Inside and outside radius/diameter. The value will be in radius or diameter
depending on machine parameter DIAMPROG and the active function
G151/G152.
<P{1-4}>
Optional. Part number (between 1 and 4).
<C{1-4}>
Optional. Number of channel associated with the part (between 1 and 4).
The instruction lets associate several channels to the same part in any
order.
#DGWZ [-100, 0, 0, 40]
(It can only be programmed at the ·T· model)
#DGWZ CYL Z [-100, 0, 0, 40]
#DGWZ CYL Z [-100, 0, 0, 40] P1 C1 C2
#DGWZ CYL Z [-100, 0, 0, 40] C1 C4 P1 C2
#DGWZ CYL {LongAxis} [{LongAxisMin},{LongAxisMax},{Int},{Ext}]
#DGWZ CYL/RECT [...]
Modify or create the part with the same number as that of the execution channel and
associated with the execution channel. For example, from channel 1, it will be part
P1 associated with channel C1; from channel 2, it will be part P2 associated with C2,
etc.
#DGWZ CYL/RECT [...] Pn Cm
Modify or create part Pn associated with channel Cm.
#DGWZ CYL/RECT [...] Pn
Modify or create part Pn associated with the execution channel.
#DGWZ CYL/RECT [...] Cm
Modify or create part Pm associated with channel Cm.
#DGWZ CYL/RECT [...] Cn Cm
Modify or create part Pn associated with channels Cn and Cm.
LongAxisMin
LongAxisMax
X
Z
Int
Ext