Fagor 6HV-585A TCX, User Manual

Page: 72 / 224

12
4 / USING YOUR APPLIANCE EN
After connecting your appliance or after a long period without it being connected to the mains,
the “
12:00
” button will flash on the display.
To set the time on the clock Display
Set the time using the + and - buttons then validate by pressing the
button.
When the time has to be changed Display
Press the button then press twice. The time will flash. Program
the new time (e.g. 7:30) using the + and - buttons.
Validate by pressing .
A beep will be emitted to confirm that the new time has been set.
SETTING AND ADJUSTING THE TIME
1 2 : 0 0
0 6 : 3 0
0 7 : 3 0
0 6 : 3 0
Programming Display
Press the button then a few seconds later press , until the
indication -CO- appears on the display.
Adjust the contrast using the + or – buttons and validate with the
button.
•ADJUSTING THE CONTRAST
Programming Display
You can program the “Timer” function of your oven. Press the
button then .
Adjust the programming time using the - / + buttons, for example 1
minute. Validate by pressing . The display shows the time again
but the countdown starts.
Once the time has ended, the timer emits a series of beeps to warn
you. These beeps can be stopped by pressing any button.
•TIMER FUNCTION
• •