37
English
English
6. Drinks distribution - coffee
Remove the filter carrier (
21
or
25
), clean it of the used coffee
grounds and refill it with 1 or 2 doses of ground coffee,
according to the filter carrier used.
Press the coffee evenly in the filter, using the dose-grinder
press.
Remove any coffee grounds from the edges of the filter.
Insert the filter carrier (
21
or
25
) to the group, locking it firmly
in place. Position the cup (or cups) under the spout (or
spouts) of the filter carrier (
21
or
25
).
Press the coffee dispensing button (
30
) and dispense.
When the desired dose is obtained, press button (
30
) again
to stop dispensing.
“Before operating the machine, perform a rinse of
the internal circuits and change the water in the
boiler.”
4.1
Changing the water in the internal groups circuits
Remove the filter carriers (
21, 25)
of the distributor groups.
Via the continuous distribution key (
30
), empty the water from
each group for approximately one minute. Repeat this
operation twice.
4.2
Changing the water in the boiler
Ensure that the indication on the display (
78
) corresponds to
the working pressure value.
Keep the hot water distributor key (
13
) pressed down for
approximately 5 seconds, the water from the boiler will drain
from the hot water nozzle (
10
).
When only steam is issued from the nozzle (
10
), press the
hot water distributor key (
13
) again.
The machine will return to its normal functions and the boiler
will be refilled with water.
5. Initial rinse
!
10
30
21
13
78
30
21
