GB
9
BRINGING THE CARD READER APART
PROGRAMMING AND READING CARDS
FITTING ACCESSORIES FOR THE PARTIALLY RECESSED APPLICATION
SURFACE APPLICATION
Pic. 1
Pic. 3
Pic. 4
partial recess
mount
surface
mount
reader
pcb
The cards or the keyrings are actually read on touching the reader;
confirmation of the reading is indicated by a buzzer sound from the receiver.
(*): Cards to be used by the installation technician.
The two cards (Red and Green), at the time when the equipment
is first installed, are both memorized into the Removable
memory.
Blanking or replacing them can only be carried out by the
manufacturer Meccanica Fadini after returning the removable
memory.
Should a duplicate of the two cards (Red and Green) be
required,the number printed on the back is to be provided.
GREEN (*)
card:
to memorize the Blue cards
and the keyrings
RED (*)
card:
to cancel the Blue cards
and the keyrings
BLUE
card or
keyring:
for the end user to open and
close the access
NOTE:
screws and expanding bolts not supplied by us.
12 V
X
Y
Z
item. 560L
item. 553L
Sech 15
item. 153L
Prit 19
item 149L
Pic. 2
cod. 148L
cod.
GREEN
RED
BL
UE
Buzzer
!
IMPORTANT: It is possible to connect 2 readers maximum to one
Receiver.
ZERO.SAPE
PROXIMITY CARD ACCESS CONTROL
item. 552L item. 162L
istr_zero.sape_GB.ai 2 10/11/2023 09:03:20
Summary of Contents for ZERO.SAPE
Page 26: ...ZERO SAPE 26...
Page 27: ...ZERO SAPE 27...