M10
M10
M10
!
!
M10
M8
M8
1)
3)
4)
5)
REMOVE THE BOLLARD FROM ITS CASING
Remove the M10 screws on
the squared cover plate
Remove the inner fixing plate
Screw the two lifting rings
down into the pre-holed seats
NOTE WELL: make sure the
ground cable is
disconnected from the
casing before lifting
Carefully hoist and remove the inner
assembly of the bollard by a winch. Make
sure the cables are not torn or cut or the
inner hydraulic pipes are damaged in this
phase.
Casing to set
into a concrete
foundation
Pic. 4
Retractable Oil-hydraulic Bollard
English
2)
6
