English
BAYT 980
oil-hydraulic barrier
Via Mantova, 177/A - 37053 Cerea (VR) Italy
Ph. +39 0442 330422
Fax +39 0442 331054
[email protected] - www.fadini.net
GB
2012/19/UE
Directive
Re. disposal of electric
and electronic waste
DISPOSE PROPERLY OF MATERIALS
ARMFUL TO THE ENVIRONMENT
TECHNICAL SPECIFICATIONS
ELECTRIC MOTOR
Power yield
0,37 kW (0,5 HP)
Absorbed power
510 W
Frequency
50 Hz
Supply voltage
230 Vac
Absorbed current
2,4 A
Capacitor
25 μF
Motor rotation speed
1.350 rpm
Intermittent service
S3
Electric cable
H05VV-F
OIL-HYDRAULIC MOTOR-PUMP UNIT - COS 982 -
Working pressure
20 atm
Max. pressure
40 atm
Pump
P6 - P8 - P16
Oil type
Oil Fadini - Item 708L
Reservoir capacity
2,5 liters
Static weight
22,5 kg
Working temperature
-20 °C +80 °C (*)
Protection standards
IP 65 (inside the housing)
(*) -40 °C with specific optional accessories (Ref. General Catalogue).
Housing weight (without beam)
75 kg
Colour of the housing
RAL 2002 Orange Red
(for Bayt 980 painted)
Door and top colour
Metallic grey, orange peel finish
(for Bayt 980 painted)
Housing, door and top
Aisi 304 inox, brushed
(for Bayt 980 stainless steel)
PERFORMANCE
(4 s - 4,20 m beam)
Frequency of use
very intensive
Service cycle
opening 4 s
dwell 4 s
closing 4 s
dwell 4 s
Complete cycle time
16 s
Complete cycles
opening-dwell-closing-dwell
No. 225/hour
Annual cycles (with 8 hours of use per day) No. 657.000
PERFORMANCE
(8 s - 6,40 m beam)
Frequency of use
very intensive
Service cycle
opening 8 s
dwell 4 s
closing 8 s
dwell 4 s
Complete cycle time
24 s
Complete cycles
opening-dwell-closing-dwell
No. 150/hour
Annual cycles (with 8 hours of use per day) No. 438.000
PERFORMANCE
(14 s - 6,40 m beam with fence)
Frequency of use
very intensive
Service cycle
opening 14 s
dwell 7 s
closing 14 s
dwell 7 s
Complete cycle time
42 s
Complete cycles
opening-dwell-closing-dwell
No. 86/hour
Annual cycles (with 8 hours of use per day) No. 251.000
PERFORMANCE
(19 s - 8,50 m beam with fence)
Frequency of use
very intensive
Service cycle
opening 19 s
dwell 10 s
closing 19 s
dwell 10 s
Complete cycle time
58 s
Complete cycles
opening-dwell-closing-dwell
No. 62/hour
Annual cycles (with 8 hours of use per day) No. 181.000
2018/10
PRODUCT SPECIFICATIONS
Oil-hydraulic road barrier with traffic stopping beams whose length range is 3 m to 8 m, very heavy duty. Oil-hydraulic unit
consisting of one motor pump assembly incorporating a piston actuator. Suitable for applications in private, commercial
industrial areas, car parks and urban applications. IP65. Overall dimensions 350 x 305 x H 1.090 mm. Anodized aluminium
beam, oval section. Reinforced, S235JR steel structure, cataphoresis treated and powder coated. Available in AISI 304
brushed stainless steel. Incorporated control board. Opening time from 3 s to 19 s, depending on beam type. Frequency of
use 3.000 cycles/day (version 8 s). Supply voltage 230 Vac ± 10%, 50 Hz. Absorbed power 510 W. Working temperature -40 °C
+80 °C. Beam options available with incorporated high visibility LEDs, fence, articulated joint (for installations with ceiling
limitations), swing away arm system in case of impact with a vehicle. Manual release device inside the housing.
INFORMATION ABOUT SAFETY AND PROPER FUNCTIONING OF THE SYSTEM
1) Make sure the site is free from utilities that may interfere with it.
2) Make sure the power supply to the electric motor is 230 V (50 Hz).
The section of the ground cable is to be chosen in compliance with the requirements of the installation site.
As far as configuration and execution of the system are concerned, these are to comply with the laws in the country of
installation.
