8
Important Safety Information: Important!
October 2000
SIEMENS CONTROL
Operator Manual
Fadal
25) NEVER STAND ON OR IN THE MACHINE. Besides the risk of slipping or
falling, serious injury could occur if a tool is unintentionally contacted.
26) CHECK FOR DAMAGED PARTS. Always check all parts for binding,
breakage, and any other condition that will affect the proper operation of
the machine and/or increase the risk of injury. Damaged or missing parts
must be repaired or replaced BEFORE operating the machine.
27) NEVER LEAVE THE MACHINE UNATTENDED. Turn the power off to the
machine when leaving the machine unattended. Never leave the machine
until it comes to a complete stop.
28) DO NOT DISCONNECT THE FRONT DOOR SAFETY SWITCHES.
29) WIPE UP SPILLS. Immediately cover with absorbent material and wipe
up coolant and oil spills around the machine. Correct the cause of the
leakage to prevent any hazards.
30) ELECTRICAL INSTALLATION OF THE MACHINE MUST BE DONE BY A
QUALIFIED ELECTRICIAN.
31) ONLY FADAL OR FADAL DISTRIBUTOR FACTORY AUTHORIZED
INDIVIDUALS MAY INSTALL THE MACHINE.
32) USE PROPER SAFETY GLOVES WHEN HANDLING SHARP OR JAGGED
EDGES. Do not wear gloves around rotating machinery.
33) DO NOT USE AIR HOSES TO BLOW CHIPS OFF YOUR BODY OR
CLOTHES. Serious injury to your eyes, hearing, and skin could result. Do
not blow towards others.
