28
Fadal/Sinumerik 810D CNC: Jog Modes Of Operation
October 2000
SIEMENS CONTROL
Operator Manual
Fadal
3) With the blue cursor keypad arrows, cursor down to RPM box,
type in the new value and press the INPUT hard key.
4) With the blue cursor keypad arrows, cursor down to the spindle
box. Use the Alternate soft key to toggle to CW and CCW
direction.
5) Press the CYCLE START hard key to activate.
Spindle Start
After establishing the RPM from T,S,M Mode, or at any time in any mode
of operation, the spindle can be turned on manually by using the green
SPINDLE START hard key button.
1) Press the SPINDLE START hard key. The spindle will turn on in the
last programmed direction and spindle speed (RPM).
Spindle Off
When the spindle is on, from any mode of operation, press the red
SPINDLE OFF button alone, to turn the spindle off.
The Reset button will also turn the spindle off.
