12
EN
1
.1 - UNPACKING
On delivery of the cutter, check that the
packaging is integral. If this is not the
case, inform the carrier or area agent
immediately.
Operate as follows to remove the pack-
aging from the cutter:
• Cut and remove the plastic bands.
• Open the box and take out the
instruction booklet.
• Proceed as described hereafter.
- Remove the protective card-
board covers from inside the
box.
- Lift the machine with great care
and place on a solid surface.
- Remove the transparent bag
wrapping the cutter.
Check that all components spec-
ified in the delivery note and this
instruction booklet are present
and fully intact.
• Should any faults be noted, such as:
- dents to the frame or guards;
- controls that are either not working
or broken;
- missing items or other problems;
please advise the courier, manufacturer
and service centre immediately.
- Carefully dispose of packaging com-
ponents (bands, cardboard, polysty-
rene, polythene bags, etc.) as report-
ed below and in accordance with the
standards of the di seguito ed in ot-
temperanza alle norme del Country
of use.
PACKING
This product complied with Directive 2002/19/UE.
The crossed out wheeled bin symbol on equipment indicates that it must be treated separately
from household waste at the end of its working life and therefore taken to a recycling facility for
electrical and electronic equipment or handed over to the reseller when purchasing new equipment
of the same type.
The user is responsible for consigning the equipment to appropriate collection facilities at the end
of its working life or face the penalties provided for by current waste management legislation.
Separate collection for subsequent delivery of waste equipment to environmentally-compatible
recycling, treatment and disposal facilities to prevent possible negative impacts on the environment
and human health whilst encouraging recycling of the product’s components.
For further information regarding the available collection facilities, please contact your local refuse
collection service or the shop in which the purchase was made.
Manufacturers and/or importers fulfil their obligations concerning environmentally-compatible
recycling, treatment and disposal either directly or by joining a collective scheme.
GUIDE TO THE TREATMENT OF WASTE EQUIPMENT
