33
EN
PROBLEM
CAUSES
SOLUTION
The appliance doesn’t start.
Main switch turned off.
Turn on the main switch.
Lack of voltage on the
power supply line.
Please contact the retailer
or an authorized assistance
centre.
The pot has not been
inserted correctly.
Check the correct insertion
of the pot.
The pot cover is not closed
correctly.
Check the correct closure of
the cover.
The direction of rotation of
the tool is not correct.
The equipment power
supply phases cables are
not connected correctly.
Let the power cables
inversion be performed by
a qualified technician.
For“C5” and “C8” models with speed changer only
The indicator light flashes
and/or the appliance does
not function.
The safety devices have
intervened.
• Check the pot is inserted
correctly and/or the cover
is closed correctly.
• Press the stop button and
re-start the appliance.
TROUBLESHOOTING
• The following information is intended to aid in identifying and correcting defects and
faults that may occur during use of the machine.
☞
Some failures can be resolved by the user; others require
precise technical skills or special skills, and must be carried
out by qualified personnel with recognized expertise and
experience in the specific area of intervention.
Do not disassemble the inner parts of the cutter. The manufacturer
declines all responsibility for any damage caused by tampering.
