27
EN
MAINTENANCE
7
.1 - Generalities
In addition to the above-mentioned cleaning operations, you should also perform routine
maintenance in order to guarantee the slicer’s operating efficiency over time.
The operator may perform the following maintenance operations:
•
Control blade sharpness:
In order to obtain good performance, the blades must
be well-sharpened. If the blades no longer cut, contact the manufacturer of the
machine or a knife-grinder for sharpening.
• The appliance does not require lubrication.
• Whenever the cutter makes an unusual noise after a certain period of time, which
is due to settling of the belt, tighten the belt tensioner positioned at the side of the
motor, under the base.
The maintenance operations must be performed always
after disconnecting the machine from the power network.
The maintenance operations to be entrusted to
personnel authorized
by the manufacturer
are the following:
• Blade replacement;
• Sharpener’s emery-wheelss replacement;
• Motor belt tension regulation;
• Motor transmission belt replacement;
• Underbase wiring’s components replacement;
• Visual check of the conditions of the electric power supply cable and the
cable gland on the base of the machine: periodically.
