FabiaTech FX5634 Fanless Series User Manual Download Page 63

Page: 63 / 86

FabiaTech Corporation

LAN Driver (RTL-8111B)

To install the LAN driver, insert the CD ROM into the CD ROM device, and

enter DRIVER>LAN>RTL8111B>WINXP or Visat32_64.

2 Execute

Setup.exe.

Note: In the LAN>RTL8111B>Vista32_64>README directory, a SETUP.HTML is

included to provide installation information.

BIOS Flash Utility

In the <UTILITY> directory, there is the Afu409.EXE file.
Step 1: Use the Afu409.EXE program to update the BIOS setting.

Step 2: And then refer to the chapter “BIOS Setup”, as the steps to modify BIOS.

Step 3: Now the CPU board’s BIOS loaded with are the newest program; user can

use it to modify BIOS function in the future, when the BIOS add some

functions.

Summary of Contents for FX5634 Fanless Series























































































Search results

Summary of Contents for FX5634 Fanless Series

Reviews:

Related manuals for FX5634 Fanless Series

Brands by name

Popular brands

FabiaTech FX5634 Fanless Series, User Manual

Search results

Summary of Contents for FX5634 Fanless Series

Reviews:

Related manuals for FX5634 Fanless Series

Brands by name

Popular brands