FabiaTech FX5634 Fanless Series User Manual Download Page 59

Page: 59 / 86

FabiaTech Corporation

The "Last State" option returns the PC to the state in effect at the time the power

outage or shutdown occurred. Assign this option the "Power On" value to reboot
automatically; assign the "Power Off" value to leave the machine powered down.

Available Options: Power Off, Power On, and Last State

Default setting: Power Off

Resume On RTC Alarm

This field specifies the RTC alarm to be turned off by extra software.

Available Options: Disabled, Enabled

Default setting: Disabled

RTC Alarm Date (Days)

This field specifies the date of the RTC alarm.

Available Options: Every day, and 01~ 31

Default setting: 15

System Time (hh:mm:ss)

This field specifies the hour/ minute/second of the RTC alarm.

Available Options: 1-24/0-60/0-60

Default setting: 12:30:30

Summary of Contents for FX5634 Fanless Series























































































Search results

Summary of Contents for FX5634 Fanless Series

Reviews:

Related manuals for FX5634 Fanless Series

Brands by name

Popular brands

FabiaTech FX5634 Fanless Series, User Manual

Search results

Summary of Contents for FX5634 Fanless Series

Reviews:

Related manuals for FX5634 Fanless Series

Brands by name

Popular brands