FabiaTech FX5634 Fanless Series User Manual Download Page 10

Page: 10 / 86

FabiaTech Corporation

Specifications

Processor Board –

AMD Mobile Sempron 638-pin Processor

2 SoDIMM slot support DDR II 533 /667 MHz SDRAM Up to 4GB

I/O Outlets –

One 10/100 and One 10/100/1000 base-TX Ethernet LAN ports.

Four USB ports (2.0) and two RS-232 serial ports.

One CRT and one PS/2 compatible keyboard and mouse interfaces.

Three audio connectors for Earphone/Line-out, Line-in and Microphone-In.

One Mini PCI Socket and One free PCI Expansion Slot.

One AC-In plug connector and one power push button.

One push button reset switch.

One power LED, One HDD/CF access LED.

Storage Bay-

One Compact Flash Socket for Compact Flash modules or MicroDrives

One 2.5" PATA or SATA hard disk space

One Combo DVD/CD-RW device (Option)

Power requirement –

AC100~AC264/47Hz~63Hz, VAC Input,45VA maximum with AMD Sempron

3700+ CPU,1G DDR2 and 160GB 2.5” SATA HD.

Dimensions -

190.0mm (D) x 280.0mm (W) x 85.0mm (H)

Summary of Contents for FX5634 Fanless Series























































































Search results

Summary of Contents for FX5634 Fanless Series

Reviews:

Related manuals for FX5634 Fanless Series

Brands by name

Popular brands

FabiaTech FX5634 Fanless Series, User Manual

Search results

Summary of Contents for FX5634 Fanless Series

Reviews:

Related manuals for FX5634 Fanless Series

Brands by name

Popular brands