FabiaTech FX5634 Fanless Series User Manual Download Page 40 | Manualshive

Page: 40 / 86

background image

FabiaTech Corporation

34

ACPI APIC Support

Allows you to enable or disable the ACPI APIC table pointer to RSDT point list.

Available Options: Disabled, and Enabled

Default setting: Enabled

AMI OEMB Table

Set this value to allow the ACPI BIOS to add a pointer to an OEMB table in the Root

System Description Table (RSDT) table.

Available Options: Enabled, and Disabled

Default setting: Enabled

¾

USB Configuration

You can use this screen to select options for the USB Configuration.

Legacy USB Support

Legacy USB Support refers to the USB mouse and USB keyboard support. Normally if
this option is not enabled; any attached USB mouse or USB keyboard will not

become available until a USB compatible operating system is fully booted with all
USB drivers loaded. When this option is enabled, any attached USB mouse or USB

keyboard can control the system even when there is no USB drivers loaded on the

system. Set this value to enable or disable the Legacy USB Support.

«
...
38
39
40
41
42
...
»

Summary of Contents for FX5634 Fanless Series























































































Reviews:

No comments

Related manuals for FX5634 Fanless Series

Brand: Aaeon Pages: 45

IntelliStation E Pro 6836

Brand: IBM Pages: 156

Brand: IBM Pages: 74

6005 - Pro Microtower PC

Brand: Compaq Pages: 4

Brand: KME Pages: 2

Brand: NovaSail Pages: 32

Gear Guard STEM

Brand: Demco Pages: 2

ESD Control ProCenter CTR101-1

Brand: Comco Pages: 6

Brand: Vivo Pages: 8

Brand: Moxa Technologies Pages: 17

Brand: Moxa Technologies Pages: 45

Brand: Electronic Pages: 4

i-One Series H5

Brand: Cybernet Pages: 33

Brand: DLoG Pages: 223

Brand: Shuttle Pages: 5

Brand: Radio Shack Pages: 72

TRS-80 Model 16

Brand: Radio Shack Pages: 274

Accelerator Eclipse

Brand: Oregon Scientific Pages: 32

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands