FabiaTech Corporation
44
¾
AddOn ROM Display Mode
Set this option to display add-on ROM (read-only memory) messages. An example
of this is a SCSI BIOS or VGA BIOS.
1. Force BIOS Set this value to allow the computer system to force a third party BIOS
to display during system boot.
2. Keep Current Set this value to allow the computer system to display the
information during system boot.
Available Options:
Force BIOS and Keep Current
Default setting:
Force BIOS
¾
Boot Up Num-Lock
This field is used to activate the Num Lock function upon system boot. If the setting
is on, after a boot, the Num Lock light is lit, and user can use the number key.
Available options:
On, Off
Default setting:
On
¾
PS/2 Mouse Support
The PS/2 mouse function is optional. Before you configure this field, make sure your
system board supports this feature. The setting of
Enabled
allows the system to
detect a PS/2 mouse on boot up. If detected, IRQ12 will be used for the PS/2
mouse. IRQ 12 will be reserved for expansion cards if a PS/2 mouse is not detected.
Disabled
will reserve IRQ12 for expansion cards and therefore the PS/2 mouse will
not function.
Available options:
Disabled, Enabled and Auto
Default setting:
Auto
¾
Wait for ‘F1’ If Error
AMIBIOS POST error messages are followed by: Press <F1> to continue
If this field is set to
Disabled
, the AMIBIOS does not wait for you to press the <F1> key
after an error message.
Available options:
Disabled, Enabled
Default setting:
Disabled
¾
Hit ‘DEL’ Message Display
Set this field to
Disabled
to prevent the message as follows:
Hit ‘DEL’ if you want to run setup
Summary of Contents for FB2402
Page 5: ...v Dimension 71 ...
Page 6: ...vi ...
Page 12: ...FabiaTech Corporation 6 ...
Page 26: ...FabiaTech Corporation 20 ...
