manualshive.com logo in svg

FabiaTech FB2402, User Manual

Share
Download
FabiaTech FB2402 User Manual Download Page 43

FabiaTech Corporation 

 

37 

‰

 

USB Configuration 

You can use this screen to select options for the USB Configuration. 

 

¾

 

USB Support 

Select Enable, if a USB device is installed to the system.  If Disabled are selected, 

the system will not be able to use a USB device. 

Available Options:

 Disabled, Enabled 

Default setting:

 Enabled 

¾

 

Legacy USB Support 

Legacy USB Support refers to the USB mouse and USB keyboard support. Normally if 

this option is not enabled; any attached USB mouse or USB keyboard will not 

become available until a USB compatible operating system is fully booted with all 
USB drivers loaded. When this option is enabled, any attached USB mouse or USB 

keyboard can control the system even when there is no USB drivers loaded on the 

system. Set this value to Enabled or Disabled the Legacy USB Support. 

Available Options:

 Disabled, Enabled and AUTO 

Default setting:

 Auto 

Summary of Contents for FB2402














































































Reviews:

No comments

Brands by name

Popular brands

Load more brands