manualshive.com logo in svg

FabiaTech FB2402, User Manual

Share
Download
FabiaTech FB2402 User Manual Download Page 44

FabiaTech Corporation 

 

38 

¾

 

USB 2.0 Controller Mode 

This field is configures the USB 2.0 controllers in High speed (480Mbps) or Full speed 
(12Mbps).  

Available Options:

 HiSpeed and FullSpeed 

Default setting:

 Hispeed 

¾

 

BIOS ECHI Hand-Off 

This is a workaround for OS without ECHI Hand-Off support. The ECHI ownership 

change should claim by ECHI driver. 

Available Options:

 Enabled and Disabled 

Default setting:

 Enabled 

¾

 

USB Beep Message 

This field can select Enable the beep during USB device enumeration. 

Available Options:

 Enabled and Disabled 

Default setting:

 Enabled 

¾

 

USB Mass Storage Driver Support 

Mass storage device emulation type. If the emulation FDD, recommended 
formatted as FAT32 format. 

Available Options:

 Disabled, and Enabled 

Default setting:

 Enabled 

USB Mass Storage Device Configuration 

USB mass storage device start unit command time-out. 

Available Options:

 10 sec, 20 sec, 30 sec, and 40 sec 

Default setting:

 20 sec 

 

 

 

 

Summary of Contents for FB2402














































































Reviews:

No comments

Brands by name

Popular brands

Load more brands