Faber Niva Inset Fires
Model: NV20AB, NV20BL
19
IMPORTANT: THESE INSTRUCTIONS SHOULD BE READ CAREFULLY AND RETAINED FOR FUTURE REFERENCE
When using electrical appliances, basic precautions should always be followed to reduce the risk of fi re, elec-
trical shock and injury to persons, including the following:
If the appliance is damaged, check with the supplier before installation and operation.
Do not use outdoors.
Do not use in the immediate surroundings of a bath, shower or swimming pool.
Do not locate the appliance immediately below a fi xed socket outlet or connection box.
This appliance can be used by children aged form 8 years and above and persons with reduced physical,
sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or
instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall
not play with the appliance. Cleaning and user maintenance shall not be made by Children without supervi-
sion.
Children of less than 3 years should be kept away unless continuously supervised. Children aged from 3
years and less than 8 years shall only switch on/off the appliance provided that it has been placed or installed
in its intended normal operating position and they have been given supervision or instruction concerning use
of the appliance in a safe way and understanding the hazards involved. Children aged from 3 years and less
than 8 years shall not plug in, regulate and clean the appliance or perform user maintenance.
Do not use this appliance in series with a thermal control, a program controller, a timer or any other device
that switches on the heat automatically, since a fi re risk exists when the appliance is accidentally covered or
displaced.
This appliance is not equipped with a device to control the room temperature. Do not use this appliance in
small rooms when they are occupied by persons not capable of leaving the room on their own, unless con-
stant supervision is provided.
Ensure that furniture, curtains or other combustible material are positioned no closer than 1 metre from the
appliance.
In the event of a fault unplug the appliance.
Unplug the appliance when not required for long periods.
Although this appliance complies with safety standards, we do not recommend its use on deep pile carpets or
on long hair type of rugs.
The appliance must be positioned so that the plug is accessible.
If the supply cord is damaged it must be replaced by the manufacturer or service agent or a similarly qualifi ed
person in order to avoid a hazard.
Keep the supply cord away from the front of the appliance.
Warning: In order to avoid overheating, do not cover the appliance. Do not place material or garments on the
appliance, or obstruct the air circulation around the appliance, for instance by curtains or furniture, as this
could cause overheating and a fi re risk.
Warning: In order to avoid a hazard due to inadvertent resetting of the thermal cut-out, this appliance must
not be supplied through an external switching device, such as a timer, or connected to a circuit that is regu-
larly switched on and off by the utility.
CAUTION - Some parts of this product can become very hot and cause burns. Particular attention has to be
given where children and vulnerable people are present.
GENERAL INFORMATION
Unpack the heater carefully and retain the packaging for possible future use, in the event of moving or returning the
fi re to your supplier.
The fi re incorporates a fl ame effect, which can be used with or without heating, so that the comforting effect may be
enjoyed at any time of the year. Using the fl ame effect on its own only requires little electricity.
The heater is designed for use inset into a 407mm (16”) or 457mm (18”) wide by 559mm (22”) high fi replace opening
or freestanding - see also section ‘Installation Instructions’.
A 2kw fan heater is discreetly positioned in the canopy of the fi re provides heating in cold weather. Switching allows
half or full heat. A distance of 1 metre (39”) must be maintained between the front of the heater and any surrounding
furniture, overhanging curtains or other obstrustions.
To reduce heat loss and to prevent any chimney up draft affecting the operation of your inset fi re we recommend they
the chimney fl ue is sealed off.
Before connecting the heater check that the supply voltage is the same as that stated on the heater.
Please note: Used in an environment where background noise is very low, it may be possible to hear a sound which is
related to the operation of the fl ame effect. This is normal and should not be a cause for concern.
Electrical connection.
WARNING – THIS APPLIANCE MUST BE EARTHED.
This heater must be used on an AC ~ supply only and the voltage marked on the heater must correspond to the supply
Summary of Contents for NIVA NV20AB
