Faber Glance, Installation Manual

Page: 7 / 26

L
6 < < < <
1 Introduction
The appliance can only be installed by a competent person in accordance with the Gas
Safety. We urgently advise you to read this installation manual properly.
This appliance complies with the guidelines for European gas appliances (Gas Appliances
Directive) and bears the CE mark.
2 Safety instructions.

The appliance should be placed, connected and annually checked in accordance
with these installation instructions and valid national and local Gas Safety
(Installation and Use) Regulations .

Check whether the data on the registration plate are in agreement with the local
type of domestic gas and pressure.

The fitter is not permitted to change these adjustments or the construction of the
appliance!

Do not place any additional imitation logs or glowing coals on the burner or in the
combustion chamber.

The appliance has been designed for ambience and heating purposes. This means
that all surfaces of the appliance , including the glass, can become very hot (hotter
than 100 °C). An exception to this are the bottom of the appliance and the
controls.

Do not place any inflammable materials within a of 0.5 m. of the radiation of the
appliance and ventilation grills.

Due to natural air circulation of the appliance, moisture and volatile components
from paint, building materials, floor coverings etc. that haven’t yet set, can be
drawn through the convection system and can be deposited on cold surfaces as