FAAC PARQUBE LE, Installation Manual

Page: 32 / 40

32
Occasional ticket issuance
Engage the Presence loop, press the button to request a ticket and draw the ticket.
Verify that the barrier is opened when the ticket is drawn and transit on the lane.
Proximity card or Tag reader
Engage the Presence loop and bring a "valid" card close to the reader.
Verify that the reading outcome message appears on the display and the barrier opens; transit on the lane.
Safety in barrier closing phase
During the barrier closing phase verify that the rod stops when the transit loop is engaged.
If photocells were installed, please check its operation.
Vacant/Full Sign
Use the software to force the FULL and VACANT conditions; verify that the peripheral displays the relevant
messages and consistently drives the connected V/F Sign.
Paper Reserve Alarm
Remove the paper roll from its holder and verify that the "Paper reserve" alert appears in the software moni-
toring window as an alarm. Replace the roll in his seat and verify that the alarm condition disappears.
Heater Operation
Verify that the plate of the thermo-heater emits heat in temperatures lower than 20°C.
Fan Operation
Verify that the fan is activated in temperatures over 30°C.
Information request entryphone
With the vehicle stopped in front of the peripheral and with the motor on, press the button to request infor-
mation and communicate with the operator of the Reception. Verify that communication is optimal.
Ver. 1.0 - 21st Nov. 2014 - ENG