532178 – Rev.A
Jcall quick installation guide
GSM system for the remote operation and management of access automation systems
1.
Introduction
Jcall is an access control system that uses a simple ring from a mobile phone. Enabled users (whose phone number has already
been entered in the system) can operate the Jcall controlled automated access system by a ring from their mobile phone,
without charge.
The system allows you to specify different access permissions by organising users into groups. Each group is associated with a
contact to be activated, daily time bands, months of the year, expiry date and the enable flag. The system records all the
accesses and events for the last thirty days in its permanent memory.
2.
Package contents
The installation kit includes (see Figure 1):
a.
Jcall board
b.
High-gain GSM antenna with magnetic base
c.
Network power supply
d.
Plate and screws for installation in a Model E enclosure (available as an
accessory)
The installation kit does not include:
The USB cable for connecting the Jcall board to the PC.
The GSM SIM to place on the board.
WARNING:
it is recommended to purchase a rechargeable GSM SIM card from the mobile phone network operator that offers
the best coverage in the area in which the system is installed.
The mobile phone network operator must provide 2G GSM
coverage. SIM cards from operators that provide only 3G or 4G coverage are not compatible.
If you use JCALL with
programming via the Internet, it is recommended to use a SIM card with an unlimited calls and data plan.
The following accessories are recommended (please contact your local FAAC sales representative for availability and prices):
Expansion card to increase the number of relay outputs
FAAC “Model E” enclosure
3.
Jcall board description
The Jcall board is shown in Figure 2. The following components are indicated:
a.
Power supply connector 12V
b.
Digital inputs connector
c.
Peripherals power supply connector (see the
characteristics of the devices that can be connected)
d.
Relay output connectors (see the characteristics of the
devices that can be controlled)
e.
“Operational LED” (green)
f.
“Error/initialisation LED” (red)
g.
Hard reset button, to restore factory settings
h.
GSM SIM housing
i.
Expansion card connector
j.
Mini USB type B connector for connection to PC
k.
GSM antenna connector
l.
“GSM network registration LED” (blue)
m.
“Power on LED” (white)
n.
On/off button
o.
Mounting holes
Figure 2: JCALL board description
Figure 1: package contents
