TEACH A RADIO RECEIVER
When the XKP W is waiting for an operation, enter:
8 # Ch
Place the receiver in learning mode on the required radio channel within 25 s
(follow the receiver’s instruction and maintain the recommended distance
between
the devices), then press:
#
(
keep it pressed until confirmation is given that the code has been learnt, then release it
)
The code of the radio channel entered is transmitted (Green LED on). Make sure
that the receiver confirms that the code has be
en learnt (receiver’s instructions).
Repeat the procedure for each radio channel required. When using the XKP W for
the first time, each radio channel has to be activated twice in succession:
Easy Operation
enter:
User code
E
wait until the Green LED turns off, then press
E
Advanced Operation
enter:
#
user code
E Ch
. wait until the green LED turns off, then repeat
Ch
.
TEACH ANOTHER XKP W
When the XKP W is waiting for an operation, enter:
8 # Ch
Place the target XKP W into learning mode on the
required radio channel within 25 S and bring the two
devices into contact with one another as shown in the
figures. Then press:
#
(
keep it pressed until confirmation is given that the code
has been learnt, then release it
)
The code of the radio channel entered is transmitted
(Green LED on). Make sure that the target XKP W
confirms that it has been learnt: Green LED on for 0.5
and 1 beep.
Repeat the procedure for each radio channel required. When using the new XKP W
for the first time, each radio channel has to be activated twice in succession.
Easy Operation
enter:
User code
E
wait until the Green LED turns off, then press
E
Advanced Operation
enter:
#
user code
E Ch.
wait until the green LED turns off, then repeat
Ch.
