If the XKP W indicates an ERROR (beeping 5x with red LED fast flashing), it should
be reprogrammed correctly. After the OK (beeping once with green LED on for 0.5
s) message appears, the XKP W waits for an operation for
60 s
.
When the XKP W is waiting for an operation, it is possible to carry out another
operation from the menu. Press
E
to end the programming (it will also end when
no key being pressed after time out).
1.
STORE A USER CODE
This stores the user codes that must be entered to activate the radio channels. You
can choose Easy or Advanced mode of operation. Only number codes can be
entered. If you attempt to store a code that is already in memory, the XKP W
signals an error.
➢
Easy operation
User codes consisting of 4 numbers, in various combinations. Each code can be
enabled for only 1 radio channel, to be specified when it is being stored.
When the XKP W is waiting for an operation, enter:
1 # code # code E Ch #
➢
Advanced operation
User codes of variable length from 2 to 6 digits, in various combinations. Each
code can be enabled for 1, several or all of the radio channels available.
When the XKP W is waiting for an operation, enter:
1 # code # code #
(enables all channels)
Or
1 # code # code E Ch #
(enables only 1 channel)
Or
1 # code # code E Ch Ch … #
(enables several channels)
2.
DELETE A USER CODE
When the XKP W is waiting for an operation, enter:
2 # code # code #
3.
DELETE ALL USER CODE
When the XKP W is waiting for an operation, enter:
3 # 3 #
