FAAC 739, Installation Manual

Page: 5 / 14

8
ENGLISH
AUTOMATED SYSTEM 739
These instructions apply to the following models:
FAAC 739
The 739 gearmotor is an electro-mechanical operator designed for moving
sliding gates.
The non-reversing reduction system ensures the gate is mechanically locked
when the gearmotor is not operating, therefore it is not necessary to install
any electric lock.
A convenient manual release with customised key makes it possible to move
the gate in the event of a power failure or malfunction of the operator.
The 739 gearmotor was designed and built for controlling vehicle
access. AVOID ANY OTHER USE WHATEVER.
1. DESCRIPTION AND TECHNICAL SPECIFICATIONS
MODEL 739 230V 739 24V
Power supply (+6% -10%) 230V~ 50Hz 230/115V~ 50/60Hz
Absorbed power (W) 350 70
Absorbed current (A)
1.5 3
Thrust capacitor (µF) 10 -
Thrust on pinion (daN)
45 40
Torque (Nm) 18 13.5
Temperature protection (°C) 140 -
Max leaf weight (Kg) 500 400
Type of pinion gear Z16 Z16
Gate speed (m/min) 12 12
Max. gate length (m) 15 15
Type of travel-limit device Mechanical Mechanical
Type of clutch Electronic Electronic
Use frequency S3 - 30% 100%
Operating ambient temperature (°C) -20 ÷ +55 -20 ÷ +55
Weight of gearmotor (Kg) 10 8.5
Protection class IP44 IP44
Operator dimensions See Fig.2 See Fig.2
2. DIMENSIONS
햲 Motor lid
햳 Electronic control unit
햴
Release device
햵 Gearmotor body
햶
Foundation plate
햷 Pinion
햸
Limit switch
햹 Motor cover
햺 Capacitor (for 739 230V only)
햻 Protective side panels
햽 Toroidal transformer (for 739 24V only)
햾 Encoder (for 739 24V only) *
햿 Battery (for 739 24V only) *
* optional
햲 Motor lid
햳 Electronic control unit
햴
Release device
햵 Gearmotor body
햶
Foundation plate
햷 Pinion
햸
Limit switch
햹 Motor cover
햺 Capacitor (for 739 230V only)
햻 Protective side panels
햽 Toroidal transformer (for 739 24V only)
햾 Encoder (for 739 24V only) *
햿 Battery (for 739 24V only) *
* optional
Fig. 1 Fig. 1
Fig. 2 Fig. 2
Values are expressed in mm. Values are expressed in mm.