F5 WANJet 500, Platform Manual

Page: 39 / 77

Using the WANJet 500 LCD and LEDs
Platform Guide: WANJet
®
500 3 - 5
Understanding LED behavior
This section describes the behavior of the LED indicators and the network
interface card LEDs on the WANJet 500 platform.
LED indicators
There are three LED indicators on the faceplate of each unit, as shown in
Figure 3.1.
Figure 3.1 LED indicators
Each LED indicator serves a specific function, as defined in Table 3.2.
Label Function Description
Power Reports the power status: on (green) or off (none). Off
indicates that the unit is not turned on, or that there is
no power connected to the unit.
System
status Reports the state of the system: on (green) or off
(none).
Hard disk
drives Reports the status of the hard drives: blinking (yellow)
when data is accessed, or off (none) when the drives
are idle.
Table 3.2 LED indicator functions