F5 WANJet 500, Platform Manual

Page: 61 / 77

Installing the WANJet Appliance Using the Rail-Mount Kit
Platform Guide: WANJet
®
500 A - 5
Figure A.5 Attaching the outer rail after extending the rail slide
Installing the unit into a rail-mount rack
After you have attached the inner rails to the device, and mounted the outer
rails in the rack using the mounting brackets, you can install the device.
To install the unit into the rack
Slide the unit into the rack, fitting the inner rails of the unit to the outer rails
of the rack.
Connecting cables and other hardware
After you have installed the unit into the rack, you need to connect the
cables and other hardware. To perform these tasks, see
Connecting the
cables , on page 2-9.