F5 WANJet 500, Platform Manual

Page: 27 / 77

Installing the WANJet 500 Platform
Platform Guide: WANJet
®
500 2 - 5
Powering up the WANJet 500 platform
After you have installed the WANJet 500 platform, you can power it up.
Two power cords provide a redundant power supply.
To power up the WANJet platform
1. Insert the two power cords into the two power supplies (numbers 5
and 6 in Figure 1.4, on page 1-6) on the back of the WANJet
platform.
2. Plug each power cord into a separate power outlet (preferably to
different power circuits).
3. Press the power switch on the back of the unit (number 4 in
Figure 1.4, on page 1-6).
The unit starts up, and you may hear a warning sound.
If one of the power cords is not connected, or fails, the unit continuously
sounds a warning beep. To disable this sound, press the power supply alarm
mute switch (number 3 in Figure 1.4, on page 1-6).
When the appliance is running, the LCD displays the default IP address of
192.168.168.100 . Wait approximately 10 more seconds for the operating
system to finish loading.