manualshive.com logo in svg

F5 ARX-2000, Hardware Reference Manual

Share
Download
F5 ARX-2000 Hardware Reference Manual Download Page 82

Chapter 4
Switch Hardware and Functionality

4 - 28

Application Control Module

For all ARX models, functionality is provided through one basic module, 
the Application

 

Control

 

Module

 

(ACM). For details, consult the following 

sections.

Control and Management Functions

The ACM supports the following switch fabric and control functions: 

• RS232/Console serial interface for local switch management

• Out-of-band 10/100 Ethernet interface for local/remote switch 

management

• Service definition and policy enforcement

• Failover signaling and configuration information

• Port mirroring and debugging

• MAC address assignment for Ethernet ports

• Real-time clock synchronization for user interfaces

• Health status and statistics monitoring and management through LEDs 

and software

• Temperature and power monitoring 

Adaptive Services

The ACM module provides the following core distributed file server 
functions:

• Virtual distribution of front-end file services for NFS v 2/3 and CIFS 

protocols

• Volume management and file server capabilities

• Back-end NAS aggregation

Network Services

The ACM supports the following network services: 

• Standard Ethernet and jumbo frame (9K) packet sizes

• Full-duplex switching at line rates for Layer 2 processing

• Low latency, store and forward switching, with built-in multicast support

• Load balancing and resource switching

• NFS Fast Path

• CIFS Fast Path 

Summary of Contents for ARX-2000



























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands