F5 ARX-2000, Hardware Reference Manual

Page: 70 / 90

Chapter 4
Switch Hardware and Functionality
4 - 16
The following table describes the LED colors and patterns that occur during
various operational states, such as booting, diagnostics, and so on.
ARX-2000
Ethernet Port Link Status LEDs
The Ethernet ports are located on the lower right front panel. The Ethernet
port LED labels are pointed out in the following figure. For details and
associated status, see
Table 4.15 .
Figure 4.10 ARX-2000 Ethernet Port LED Labels
Table 4.14 ARX-2000 Alarm and Status LED States
Alarm LED Status LED Module State
Off Green Online.
Red Green (blinking) In the process of booting.
Off Amber Online Partial. At least one processor is online,
but at least one processor is not yet online.
If the offline processor does not come online in
5 minutes, this status changes to Failed Partial.
Red Amber Failed Partial. At least one processor is online,
but at least one processor has failed.
Off Off No power.
Table 4.15 ARX-2000 Ethernet Port Link Status LEDs
LED Status
LED in upper left
connector corner
• Steady amber. Port is enabled and a link
established at 100MB.
• Steady green. Port is enabled and a link is
established at 1000MB.
LED in upper right
connector corner Activity status. Flashing green indicates packet
traffic.