F-SECURE POLICY MANAGER 8.0, Administrator'S Manual

Page: 49 / 221

CHAPTER 3 49
Installing F-Secure Policy Manager Server
the
<VirtualHost>
directive, which is associated with F-Secure Policy
Manager Server Admin Module. Here is that directive’s default
configuration:
#FSMSA port
<VirtualHost _default_:8080>
<Location /fsmsa/fsmsa.dll>
SetHandler fsmsa-handler
</Location>
</VirtualHost>
To associate it with the newly selected port, change the statement to:
#New FSMSA port
<VirtualHost _default_:8888>
<Location /fsmsa/fsmsa.dll>
SetHandler fsmsa-handler
</Location>
</VirtualHost>
3.4.3 F-Secure Policy Manager Server Configuration Settings
This section introduces and explains all the relevant entries present in the
F-Secure Policy Manager Server configuration file, and how they are
used.
ServerRoot: This directive sets the directory in which the server is
installed. Relative paths for other configuration files are taken as relative
to this directory.
WARNING: If you have workstations already configured to
access F-Secure Policy Manager Server (through the F-Secure
Policy Manager Server Host module) you should not change
the F-Secure Policy Manager Server Host port where agents
communicate, since you might reach a state where the
workstations will not be able to contact the server