F-SECURE POLICY MANAGER 8.0, Administrator'S Manual

Page: 176 / 221

176
Specify a List of Hosts That Can Access Web Reporting
Access to F-Secure Policy Manager Web Reporting can also be allowed
only from certain separately defined IP addresses. Below is an example
of the edited
httpd.conf file section:
#Web Reporting listen
Listen 8081
# Web Reporting port:
<VirtualHost _default_:8081>
JkMount /* ajp13
ErrorDocument 500 "Policy Manager Web Reporting could not
be contacted by the Policy Manager Server.
<Location / >
Order Deny,Allow
Deny from all
Allow from ip-address-1
Allow from ip-address-2
Allow from ip-address-3
</Location>
</VirtualHost>
After this, only those people who have access to the machines with the
defined IP addresses can use Web Reporting.
9.5.4 Changing the Web Reporting Port
The recommended method for changing the F-Secure Policy Manager
Web Reporting port is to re-run the F-Secure Policy Manager Setup, and
change the Web Reporting port there. For more information, see
“
Installation Steps ” , 34 .
You can also change the Web Reporting port by editing the httpd.conf file.