CHAPTER 5
191
<host>[:<port>] where "host" is the DNS-name or IP-address of the
SMTP server, and "port" is the SMTP server port number.
2.
Enter the sender’s address for e-mail alert messages in the
sender address (From):
field.
3.
Enter the e-mail alert message subject in the
E-mail subject:
field.
See the MIB help text for a list of possible parameters to use in the
message subject.
Step 3.
Set up E-mail Alert Forwarding
The
Alert Forwarding
table is used to configure where different types of
alerts are to be forwarded.
1.
Select the
check box on the
Security Alert
row. This opens the
E-mail Recipient Addresses (To)
dialog box.
2.
Select the
Use the same address for all products
check box, and
enter the e-mail address in the field that is activated. If you want the
alerts to be sent to several e-mail addresses, separate them by
commas. When finished, click
OK
.
3.
Click
to save the policy data.
4.
Click
to distribute the policy.
Summary of Contents for CLIENT SECURITY 7.00
