F-One Stand Up Paddle, User Manual, Page: 21 / 24

Assemble a foil together with the board equiped with twin tracks
Disassemble the foil from the board
When using the Papenoo Convertible for SUP foiling
When using the Papenoo Convertible for Wind foiling
• Insert 2x M6x25 screws into the two front holes
of the top plate and assemble with the T-nuts (a
few turns only to keep them as loose as possible).
• Place 2x M6x25 screws, assembled with 2x
T-nuts (a few turns only to keep them as loose
as possible), into the twin tracks and slide them
to the back.
• Bring the mast and top plate over the twin track
area and slide the two front T-nuts into the ope-
ning of the track.
• Slide the plate forward until you are able to
slide the back screws into the rear slots of the
top plate.
• Place the top plate at the desired position along
the twin tracks and fasten the 4x screws with a
Torx tool until they are tight.
• Untighten the 4x screws of the top plate and
slide the 2x rear ones out of the top plate slot.
• Slide the top plate backward until you are able
to pull the 2x front T-nuts out through the main
opening of the track
• Keep the back screws into the track and tighten
them to keep them safe.
• Place 2x M6x25 screws, assembled with 2x
T-nuts (a few turns only to keep them as loose
as possible), into the twin tracks and slide them
to the back.
• Place the 2x front holes of the top plate over
the 2x M6 inserts located forward of the twin
track and fasten with 2x M6x25 screws (no T-nut
needed)
• Bring the back screws into the rear slots of the
Top Plate
• Fasten the 4x screws with a Torx tool until they
are tight.
• Follow the standard process to assemble the
foil over the board using the twin tracks only.
• Windfoiling requires the foil to be set towards
the back of the tracks.
4
2 5
3
1
FRANÇAIS
ENGLISH
21