www.ffgroup-tools.com
English |
7
CDD/35 20V PRO | CDD/40 20V PRO
f
when battery pack is not in use, keep it away from
other metal objects, like paper clips, coins, keys,
nails, screws or other small metal objects, that can
make a connection from one terminal to another.
Shorting the battery terminals together may cause
burns or a fire.
f
Under abusive conditions, liquid may be ejected
from the battery; avoid contact. If contact acci
-
dentally occurs, flush with water. If liquid contacts
eyes, additionally seek medical help.
Liquid ejected
from the battery may cause irritation or burns.
SERvICE
have your power tool serviced by a qualified
repair person using only identical replacement
parts.
This will ensure that the safety of the power
tool is maintained.
SAFETY INSTRUCTIONS FOR CORDLESS DRILL
DRIvERS
f
Avoid damage that can be caused by screws, nails
and other elements in your workpiece; remove them
before you start working.
f
Always check that the supply voltage is the same as the
voltage indicated on the nameplate of the charger.
f
Switch off the power tool immediately when the tool
insert jams. Be prepared for high reaction torque that
can cause kickback. The tool insert jams when:
The power tool is subject to overload or
It becomes wedged in the workpiece
f
Use only accessories with an allowable speed match
-
ing at least the highest no-load speed of the tool.
f
The tool/charger is not intended for use by persons
(including children) with reduced physical, sensory or
mental capabilities, or lack of experience and knowl-
edge, unless they have been given supervision or
instruction concerning use of the tool/charger by a
person responsible for their safety.
f
Ensure that children do not play with the tool/charger.
f
Hold the machine with a firm grip. High reaction torque
can briefly occur while driving in and loosening screws.
f
Secure the workpiece (a workpiece clamped with
clamping devices or in a vice is held more securely than
by hand).
f
Hold power tool by insulated gripping surfaces, when
performing an operation where the cutting accessory
or fastener may contact hidden wiring or its own cord
(cutting accessory and fasteners contacting a “live”
wire may make exposed metal parts of the power tool
“live” and could give the operator an electric shock).
f
Use suitable detectors to find hidden utility lines or
call the local utility company for assistance (contact
with electric lines can lead to fire or electrical shock;
damaging a gas line can result in an explosion; pene-
trating a water pipe will cause property damage or an
electrical shock).
f
Always wait until the machine has come to a com-
plete stop before placing it down. The tool insert can
jam and lead to loss of control over the power tool.
f
Dust from material such as paint containing lead,
some wood species, minerals and metal may be harm-
ful (contact with or inhalation of the dust may cause
allergic reactions and/or respiratory diseases to the
operator or bystanders); wear a dust mask and work
with a dust extraction device when connectable.
f
Certain kinds of dust are classified as carcinogenic (such
as oak and beech dust) especially in conjunction with
additives for wood conditioning; wear a dust mask and
work with a dust extraction device when connectable.
INSTRUCTIONS FOR ChARGERS AND BAT-
TERIES
1. BATTERY ChARGERS
a. Before charging, read the instructions.
b.
For indoor use. Do not expose to rain.
c. Do not charge non-rechargeable batteries.
2. BATTERY
a.
The battery must be removed from the appli
-
ance before it is scrapped.
b. The appliance must be disconnected from the
supply mains when removing the battery.
c. The battery is to be disposed of safely.
d. Do not use non-rechargeable batteries.
e. Do not crush, open or burn the battery. Exposure
to potentially harmful materials may occur.
f.
In case of fire use C0
2
dry chemical extinguisher.
g. Do not expose to high temperatures >45°C. Cells
may degrade at high temperatures.
h. The battery must be charged by a constant cur-
rent, constant voltage transformer.
i. Charge battery regularly in conditions between
5°C to 45°C with the specified charger designed
for this battery.
j.
Store in a dry, well ventilated area within the rec
-
ommended limits of 10°C to 30°C.
k. Do not use battery if it has been stored at 5°C or
less. Allow it to "normalise" at room temperature
before usage/changing.
l.
During decommissioning remove the battery cell
for recycling separately to the product, which is
covered by the waste electrical and electronic
equipment directive. Insulate the terminals with
adhesive insulating tape to prevent a short cir
-
cuit, fire or explosion occurring.
CONNECTION TO ThE pOwER SUppLY
Make sure the power supply information on the ma-
chine’s rating plate are compatible with the power
supply you intend to connect it to.
This appliance is Class II* and is designed for connec-
tion to a power supply matching that detailed on the
rating label and compatible with the plug fitted. If
an extension lead is required, use an approved and
compatible lead rated for this appliance. Follow all
the instruction supplied with the extension lead.
*Double insulated: This product requires no
earth connection as supplementary insulation
is applied to the basic insulation to protect
against electric shock in the event of failure of
the basic insulation.
LIThIUM-ION MATERIAL DATA ShEET
f
As a substance under normal conditions of use it is not
considered a hazard to health. In the event of acciden
-
tal release, measures to prevent spread must be ad
-
hered. Do not contaminate rivers, waterways or drains.
f
Composition of lithium-manganese, lithium-cobalt and
lithium salt as the organic solvent electrolyte (nonaque
-
ous liquid).
