F.F. Group CCS-20V PLUS, Original Instructions Manual

Page: 8 / 52

| English 8
to potentially harmful materials may occur.
f. In case of fire use C0
2
dry chemical extinguisher.
g. Do not expose to high temperatures >45°C. Cells
may degrade at high temperatures.
h. The battery must be charged by a constant current,
constant voltage transformer.
i. Charge battery regularly in conditions between 5°C
to 45°C with the specified charger designed for this
battery.
j. Store in a dry, well ventilated area within the rec -
ommended limits of 10°C to 30°C.
k. Do not use battery if it has been stored at 5°C or
less. Allow it to "normalise" at room temperature
before usage/changing.
l. During decommissioning remove the battery cell
for recycling separately to the product, which is
covered by the waste electrical and electronic
equipment directive. Insulate the terminals with
adhesive insulating tape to prevent a short circuit,
fire or explosion occurring.
CONNECTION TO THE POWER SUPPLY
Make sure the power supply information on the ma-
chine's rating plate are compatible with the power
supply you intend to connect it to.
This appliance is Class II* and is designed for connec-
tion to a power supply matching that detailed on the
rating label and compatible with the plug fitted. If an
extension lead is required, use an approved and com -
patible lead rated for this appliance. Follow all the in-
struction supplied with the extension lead.
*Double insulated : This product requires no earth
connection as supplementary insulation is applied
to the basic insulation to protect against electric
shock in the event of failure of the basic insulation.
LITHIUM-ION MATERIAL DATA SHEET
f
As a substance under normal conditions of use it is
not considered a hazard to health. In the event of
accidental release, measures to prevent spread must
be adhered. Do not contaminate rivers, waterways or
drains.
f
Composition of lithium-manganese, lithium-cobalt and
lithium salt as the organic solvent electrolyte (non -
aqueous liquid).
f
Hazardous Decomposition: None during normal oper -
ating conditions. If cell is ruptured hydrogen fluoride
and carbon monoxide may be released.
PRODUCT SPECIFICATIONS
INTENDED USE
The cordless handheld circular saw is designed for
sawing straight cuts in wood, wood-type materials
and plastics. In the case of plastic workpieces, be care-
ful not to overheat the tips of the saw blade and melt
the plastic. The equipment is to be used only for its
prescribed purpose. Any other use is deemed to be a
case of misuse. Please note that our equipment has
not been designed for use in commercial, trade or in-
dustrial applications.
TECHNICAL DATA
IDENTIFICATION
1. Handle
2. ON/OFF switch
3. Locking button for ON/OFF switch
4. Locking lever for cutting depth setting
5. LED lamp
6. Soleplate
7. Locking lever for miter setting
8. Locking screw for parallel stop
9. Scale for miter angle
10. Additional handle
11. Spindle lock
12. Saw blade
13. Saw blade wrench
14. Connection for sawdust extractor
15. Line guide
16. Parallel stop
17. Screw for securing the saw blade
Article number 41319
Model CCS-20V PLUS
Motor power supply V DC 20
Idling speed min -1 4.200
Cutting depth at 90° mm 48
Cutting depth at 45° mm 33
Blade Size ø mm 150
Blade holder ø mm 10/16
Blade thickness mm 1,6
Weight Kg 2,09
Protection class / II
Sound emission values determined according to
EN 60745-1
Typically the A-weighted noise levels of the product are:
Sound pressure level dB(A) 79,2
Sound power level dB(A) 90,2
Uncertainty K dB 3
Wear hearing protection!
Vibration total values a
h
(triax vector sum)
and uncertainty K determined according to EN
60745-1
Vibration Level:
Handle:
a
h
m/s
2
1,29
K m/s 2 1,5
Auxiliary Handle:
a
h
m/s
2
2,02
K m/s
2
1,5