Model
MASS 2
Version
V_1.0
Prepared by
H/W
Date
22/01/2008
Subject Technical
Manual Page
28/59
A dedicated pin “INS” is used to perform card insertion and removal for SD/MMC. The pin “INS” will connect to the pin
“
VSS2” of a SD/MMC connector. Then the scheme of card detection is the same as that for MS. It is shown Figure 23.
Figure 23. Card Detection.
6.5
Camera Interface
MT6225 ISP support VGA sensor YUV422/RGB565 interface. Included functions are brightness-contrast-saturation-
hue tuning and input image grab window. Down sample function can be used before image output from ISP.
Figure 24. Camera Interface circuit of MASS 2. Figure 25. Camera signal sequence.
Summary of Contents for MASS2
