Ezy-Lift 2000, Installation Manual, Page: 13 / 21

13
13
Use caution, Keep people, pets and property clear of the path of the load, keep the work area clear and free
of obstructions.
Do not use for supporting an unattended load.
Do not use for towing other vehicles
BEFORE OPERATING
Visually inspect the hook, winch cable, winch and accessories for any damage or wear. Reject nylon slings
with abnormal wear, torn stitching, broken or cut fibers or discoloration or deterioration. Reject wire-
cable with kinking, crushing, bird-caging, or other distortions, evidence of heat damage, cracks, defor-
mation, or worn end attachments, six randomly broken wires in a single cable lay, three broken wires in
one strand of cable, cracked hooks and hooks open more than 15% at the throat.
Ensure that the truck’s cargo bed and suspension system are in good condition, i.e., shocks, springs, etc.
Check to see that all fasteners are secure and that the gusset screws are all tight
Check for any evidence of hydraulic fluid leaks
MOVING A LOAD
Center the hook over the load to keep the cable from slipping out of the drum grooves and overlapping, and
to prevent the load from swinging when it is lifted. Inspect the drum to verify that the cable is in the
grooves.
Lift the load only high enough to clear the tailgate or rear of the cargo bed.
Avoid putting fingers arms in pinch points between Ezy-Lift arm frame and top of cargo box.
Do not stand in cargo bed when loading or unloading.
Avoid side pulls. These can cause the winch cable to slip out of the drum groove, damaging the wire or
destabilizing the winch.
Never leave suspended loads unattended. In an emergency where the Ezy-Lift has become inoperative. If a
load must be left suspended for any length of time, barricade and post signs under the load and on all
three sides. Turn off the truck and lock it so it cannot b moved.
Never move truck with a suspended load.