background image

4

Method 2 Add by gateway

1. Press the function key of the gateway once to make the gateway enter device adding mode, and the LED indicator ring is in 

slow-flashing white.
2. Press and hold the Button of the Sensor for 5s to make the Sensor enter network configuration mode, and the LED indicator 

light is fast-flashing.

3. There will be a  voice prompt reminding you that the Sensor has been added to the gateway automatically, or you can view 

the addded Sensor on your EZVIZ APP.

·

If the LED indicator light is fast-flashing green for 3 mins, which means the Sensor is failed to be added to the gateway, please repeat the 

above steps again.

·

If you want to delete the Sensor, please choose either of the following methods to clear the matching relationship between the Sensor and 

the gateway:

Enter detailed page of the Sensor on your EZVIZ APP, and then delete the Sensor;

Press and hold the Button of the Sensor for 5s to reset and then delete the Sensor from the gateway.

Select Appropriate Location

Installation Cautions

• 

Please strictly refer to the installation ways of the user manual to install your sensor.

• 

To avoid the happenness of dangers, please fix the sensor securely when install it on walls or ceilings.

• 

Please ensure that all components includes the sensor inside of the package are in good conditions

• 

There should be multiple sensors when the length of the installation location (like ceiling) is greater than 10 meters.

• 

Please install the Sensor after finish your indoor decoration, for fear that the Sensor is polluted by the environment.

• 

The installation parameters are subject to EN 14604:2005/AC:2008.

• 

Do not install the Sensor on the following locations:

High-humidity spaces like kitchen, water heater, bathroom;

High-temperature and pollution-prone places like stoves;

Severe convection places like air-conditioners, fans, heating outlet;

Object shelters;

Dusty, nasty places or places with many insects;

Places with a distance of less then 1.5 meters from the light;

Dead-air spaces like top of house with spire and house corners.

1� For Flat Roof

The edge of the Sensor should be at least 500mm away from any wall.

Forbidden Zone

Optimal 

Installation Site

Suitable

Installation Site

500mm

Forbidden Zone

500mm

Summary of Contents for T4C













Reviews: